Our Crystal Top Coat is formulated to provide a stunning "Crystal" or glass-like finish on your nails. With a thicker viscosity than the Extreme Shine but not as thick as the Rubber Top Coat, it is ideal for creating liquid jewelry effects and for use with mirror effect powders. This non-wipe formula ensures an even application and can be easily removed with Gel Remover.
Professional UV/LED
Cont. Neto: 15ml - 0.5 Fl. Oz
✦ Our products are marketed with a minimum of 9 months before their expiration date.
✦ All Pink Mask nail polishes are vegan, cruelty-free, and 13-free, formulated for long-lasting shine. Our formula boasts strong pigmentation, is self-leveling, does not shrink when used, and is easy to handle!
✦ Warning: We strive to show our shades as faithfully as possible, but they may appear
1. Prepare the Natural Nail: Push back cuticles and trim if necessary (optional: you can use a diamond flame bit).
2. Create Porosity: Use a 240-grit file to create porosity on the nail. Clean with a wipe and dehydrator (or a mixture of 70% alcohol and 30% water).
3. Base Coat: Apply a thin layer of Base Coat and cure under a UV lamp.
4. Gel Color: Apply two layers of your chosen Gel Color, curing between each layer.
5. Apply Crystal Top Coat: Finish with a thin layer of Crystal Top Coat.
6. Cure: Cure under a UV lamp of 48 watts or higher for approximately 30 seconds.
Nuestro Crystal Top Coat está formulado para proporcionar un impresionante acabado "Crystal" o similar al vidrio en tus uñas. Con una viscosidad más gruesa que el Extreme Shine, pero no tan espesa como el Rubber Top Coat, es ideal para crear efectos de joyería líquida y para su uso con polvos de efecto espejo. Esta fórmula no requiere limpieza y asegura una aplicación uniforme, además de poder ser removida fácilmente con Gel Remover.
Pasos de Aplicación:
Preparación de la uña natural: Empujar cutículas y cortarlas en caso de ser necesario (opcional: puedes usar una fresa de llama diamantada).
Crear Porosidad: Darle porosidad a la uña con una lima de 240. Clarificar con un wipe y un deshidratador (o una mezcla de 70% de alcohol y 30% de agua).
Aplicar Base Coat: Aplicar una fina capa de Base Coat y curar en lámpara UV.
Aplicar Gel Color: Aplicar dos capas de Gel Color, curando entre cada capa.
Aplicar Crystal Top Coat: Aplicar una fina capa de Crystal Top Coat.
Curar: Curar en lámpara UV superior a 48 watts por aproximadamente 30 segundos.
Skip to content
