Our Diamond Matte Top Coat contains small shiny flakes that give your designs an incredible finish.
It is applied in the same way as a traditional top coat, is non-wipe, has a matte effect, and can be easily removed with Gel Remover. This versatile formula provides a matte finish with a subtle shine from the flakes, sealing and protecting the polish while preventing chipping and lifting.
For a better finish, we recommend applying a Pink Mask Base Coat GELCOL-001 before placing the top coat for enhanced adhesion, resulting in a sophisticated and elegant look.
Professional UV/LED
Cont. Neto: 15ml - 0.5 Fl. Oz
✦ Our products are marketed with a minimum of 9 months before their expiration date.
✦ All Pink Mask nail polishes are vegan, cruelty-free, and 13-free, formulated for long-lasting shine. Our formula boasts strong pigmentation, is self-leveling, does not shrink when used, and is easy to handle!
✦ Warning: We strive to show our shades as faithfully as possible, but they may appear
1. Prepare the Natural Nail: Push back cuticles and trim if necessary (optional: you can use a diamond flame bit).
2. Create Porosity: Use a 240-grit file to create porosity on the nail. Clean with a wipe and dehydrator (or a mixture of 70% alcohol and 30% water).
3. Base Coat: Apply a thin layer of Base Coat and cure under a UV lamp.
4. Gel Color: Apply two layers of your chosen Gel Color, curing between each layer.
5. Apply Diamond Matte Top Coat: Finish with a thin layer of Diamond Matte Top Coat.
6. Cure under a UV lamp of 48 watts or higher for approximately 30 seconds
Nuestro Top Coat Diamond Matte contiene pequeños flakes brillosos que le dan a tus diseños un acabado increíble. Se aplica de la misma manera que el Top Coat Tradicional, es non-wipe, tiene efecto mate y se remueve con Gel Remover.
Para un mejor acabado, se recomienda aplicar una Base Coat Pink Mask GELCOL-001 antes de colocar el top coat para una mejor adherencia.
Pasos de Aplicación:
1. Preparación de la uña natural: Empujar las cutículas y cortarlas en caso de ser necesario (opcional: puedes usar una fresa de llama diamantada).
2.Crear Porosidad: Darle porosidad a la uña con una lima de 240. Clarificar con un wipe y un deshidratador (o una mezcla de 70% de alcohol y 30% de agua).
3.Base Coat: Aplicar una fina capa de Base Coat y curar en lámpara UV.
4. Gel Color: Aplicar dos capas de Gel Color, curando entre cada capa.
5.Top Coat Diamond Matte: Finalizar con una fina capa de Top Coat Diamond Matte.
6. Curar: Curar en lámpara UV superior a 48 watts por aproximadamente 30 segundos.
Skip to content
