Our Cat Eye Top Coat is designed to create the stunning cat eye effect with a magnet over any nail polish. To achieve this effect, slide a magnet 1 or 2 cm away from the nail after applying the product, and then cure it in a UV/LED lamp. This top coat is applied in the same way as a traditional top coat, is non-wipe, and can be easily removed with Gel Remover. It creates a unique and eye-catching cat eye effect while sealing and protecting the polish.
For the best results, apply the Cat Eye Top Coat as the final step to achieve the desired cat eye effect. Ensure you slide the magnet at the proper distance to create the perfect pattern.
Professional UV/LED
Cont. Neto: 15ml - 0.5 Fl. Oz
✦ Our products are marketed with a minimum of 9 months before their expiration date.
✦ All Pink Mask nail polishes are vegan, cruelty-free, and 13-free, formulated for long-lasting shine. Our formula boasts strong pigmentation, is self-leveling, does not shrink when used, and is easy to handle!
✦ Warning: We strive to show our shades as faithfully as possible, but they may appear
1. Prepare the Natural Nail: Push back cuticles and trim if necessary (optional: you can use a diamond flame bit).
2. Create Porosity: Use a 240-grit file to create porosity on the nail. Clean with a wipe and dehydrator (or a mixture of 70% alcohol and 30% water).
3. Apply Base Coat: Apply a thin layer of Base Coat and cure under a UV lamp.
4. Gel Color: Apply two layers of your chosen Gel Color, curing between each layer.
5. Cat Eye Top Coat: Apply a thin layer of Cat Eye Top Coat.
Slide the Magnet 1 or 2 cm away from the nail.
6. Cure under a UV lamp of 48 watts or higher for approximately 30 seconds.
Nuestro Top Coat Cat Eye está diseñado para crear el efecto ojo de gato con un imán sobre cualquier esmalte de uñas. Para lograrlo, debes deslizar un imán a 1 o 2 cm de distancia de la uña después de aplicar el producto y finalmente curarlo en la lámpara UV/LED. Se aplica de la misma manera que el Top Coat Tradicional, es non-wipe y se remueve con Gel Remover.
Pasos de Aplicación:
1. Preparación de la uña natural: Empujar las cutículas y cortarlas en caso de ser necesario (opcional: puedes usar una fresa de llama diamantada).
2. Darle porosidad a la uña con una lima de 240. Clarificar con un wipe y un deshidratador (o una mezcla de 70% de alcohol y 30% de agua).
3. Aplicar una fina capa de Base Coat y curar en lámpara UV.
4. Aplicar dos capas de Gel Color, curando entre cada capa.
5. Aplicar una fina capa de Top Coat Cat Eye.
Deslizar un imán a 1 o 2 cm de distancia de la uña.
6. Curar en lámpara UV superior a 48 watts por aproximadamente 30 segundos.
Skip to content
