Our Gold Diamond Top Coat contains small shiny and metallic flakes that give your designs an incredible finish.
It is applied in the same way as a traditional top coat, is non-wipe, provides a glossy effect, and can be easily removed with Gel Remover. This top coat adds a shiny, metallic touch to your nail designs, creating an eye-catching finish while ensuring easy application and convenient removal.
Professional UV/LED
Cont. Neto: 15ml - 0.5 Fl. Oz
✦ Our products are marketed with a minimum of 9 months before their expiration date.
✦ All Pink Mask nail polishes are vegan, cruelty-free, and 13-free, formulated for long-lasting shine. Our formula boasts strong pigmentation, is self-leveling, does not shrink when used, and is easy to handle!
✦ Warning: We strive to show our shades as faithfully as possible, but they may appear
1. Prepare the Natural Nail: Push back cuticles and trim if necessary (optional: you can use a diamond flame bit).
2. Create Porosity: Use a 240-grit file to create porosity on the nail. Clean with a wipe and dehydrator (or a mixture of 70% alcohol and 30% water).
3. Base Coat: Apply a thin layer of Base Coat and cure under a UV lamp.
4. Gel Color: Apply two layers of your chosen Gel Color, curing between each layer.
5. Gold Diamond Top Coat: Finish with a thin layer of Gold Diamond Top Coat.
6. Cure under a UV lamp of 48 watts or higher for approximately 30 seconds.
Nuestro Top Coat Gold Diamond contiene pequeños flakes brillosos y metálicos que le dan a tus diseños un acabado increíble. Se aplica de la misma manera que el Top Coat Tradicional, es non-wipe, proporciona un efecto brillante y se puede remover con Gel Remover
Pasos de Aplicación:
1. Preparación de la uña natural: Empujar las cutículas y cortarlas en caso de ser necesario (opcional: puedes usar una fresa de llama diamantada).
2. Darle porosidad a la uña con una lima de 240. Clarificar con un wipe y un deshidratador (o una mezcla de 70% de alcohol y 30% de agua).
3. Aplicar una fina capa de Base Coat y curar en lámpara UV.
4. Aplicar dos capas de Gel Color, curando entre cada capa.
5. Finalizar con una fina capa de Top Coat Gold Diamond.
6. Curar en lámpara UV superior a 48 watts por aproximadamente 30 segundos.
Skip to content
