Our Rubber Top Coat is characterized by its high viscosity and hyperflexibility. It is non-wipe and requires gel remover for its removal.
This top coat is perfect for:
- Encapsulating glitter or mylar flakes.
- Working with jewelry or rhinestones, providing perfect adhesion.
- Finishing a capping or overlay manicure.
- Serving as a traditional top coat for gel polish.
For the best results, ensure that the Rubber Top Coat is applied over a well-prepared and cured surface to maximize adhesion and durability.
Professional UV/LED
Size: 15ml - 0.5 Fl. Oz
✦ Our products are marketed with a minimum of 9 months before their expiration date.
✦ All Pink Mask nail polishes are vegan, cruelty-free, and 13-free, formulated for long-lasting shine. Our formula boasts strong pigmentation, is self-leveling, does not shrink when used, and is easy to handle!
✦ Warning: We strive to show our shades as faithfully as possible, but they may appear
1. Prepare the Natural Nail: Push back cuticles and trim if necessary (optional: you can use a diamond flame bit).
2. Create Porosity: Use a 240-grit file to create porosity on the nail. Clean with a wipe and dehydrator (or a mixture of 70% alcohol and 30% water).
3. Base Coat: Apply a thin layer of Base Coat and cure under a UV lamp.
4. Gel Color: Apply two layers of your chosen Gel Color, curing between each layer.
5. Rubber Top Coat: Apply a thin layer of Rubber Top Coat to encapsulate glitter or other elements.
6. Cure under a UV lamp of 48 watts or higher for approximately 30 seconds.
Nuestro Top Coat Rubber se caracteriza por su alta viscosidad y hiper flexibilidad. Es non-wipe y requiere de un removedor de gel para su eliminación.
Este top coat es perfecto para:
Encapsular glitter o escamas de mylar.
Trabajar con joyas o rhinestones, proporcionando una adhesión perfecta.
Finalizar un manicure de capping u overlay.
Servir como un top coat tradicional para esmalte en gel.
Para obtener los mejores resultados, asegúrate de aplicar el Top Coat Rubber sobre una superficie bien preparada y curada para maximizar la adhesión y durabilidad.
Pasos de Aplicación:
1. Preparar la uña natural: Empujar las cutículas y recortar si es necesario (opcional: puedes usar una fresa de llama diamantada).
2. Usa una lima de 240 granos para crear porosidad en la uña. Limpiar con un wipe y un deshidratador (o una mezcla de 70% de alcohol y 30% de agua).
3. Aplicar una capa delgada de Base Coat y curar bajo lámpara UV.
4. Aplicar dos capas del Gel Color elegido, curando entre cada capa.
5. Aplicar una capa delgada de Top Coat Rubber para encapsular glitter u otros elementos.
6. Curar bajo lámpara UV de 48 watts o más por aproximadamente 30 segundos.
Skip to content
