Our Dots Top Coat is a matte top coat designed to create a unique crocodile egg-like effect on your nails. It contains small dots of varying sizes that produce a distinctive finish without texture, making it ideal for use over light-colored bases. This top coat not only enhances the visual appeal of your designs but also seals and protects the polish, prevents chipping and flaking, and provides a smooth, sleek matte finish.
Professional UV/LED
Cont. Neto: 15ml - 0.5 Fl. Oz
✦ Our products are marketed with a minimum of 9 months before their expiration date.
✦ All Pink Mask nail polishes are vegan, cruelty-free, and 13-free, formulated for long-lasting shine. Our formula boasts strong pigmentation, is self-leveling, does not shrink when used, and is easy to handle!
✦ Warning: We strive to show our shades as faithfully as possible, but they may appear
1. Prepare the Natural Nail: Push back cuticles and trim if necessary (optional: you can use a diamond flame bit).
2. Create Porosity: Use a 240-grit file to create porosity on the nail. Clean with a wipe and dehydrator (or a mixture of 70% alcohol and 30% water).
3. Base Coat: Apply a thin layer of Base Coat and cure under a UV lamp.
4. Gel Color: Apply two layers of your chosen Gel Color, curing between each layer.
5. Top Dots: Finish with a thin layer of Top Dots.
6. Cure under a UV lamp of 48 watts or higher for approximately 30 seconds.
Nuestro Top Dots es un top coat mate diseñado para crear un efecto similar al "huevo de cocodrilo" sobre tus uñas. Contiene pequeños puntos de diferentes tamaños que generan un acabado único sin relieve, siendo ideales para usar sobre bases de colores claros.
Este top coat no solo realza el atractivo visual de tus diseños, sino que también previene el agrietamiento, aumenta la durabilidad y deja un acabado suave y liso
Pasos de Aplicación:
1. Preparación de la uña natural: Empujar las cutículas y cortarlas en caso de ser necesario (opcional: puedes usar una fresa de llama diamantada).
2. Darle porosidad a la uña con una lima de 240. Clarificar con un wipe y un deshidratador (o una mezcla de 70% de alcohol y 30% de agua).
3. Base Coat: Aplicar una fina capa de Base Coat y curar en lámpara UV.
4. Gel Color: Aplicar dos capas de Gel Color, curando entre cada capa.
5. Aplicar Top Dots: Finalizar con una fina capa de Top Dots.
6. Curar en lámpara UV superior a 48 watts por aproximadamente 30 segundos.
Skip to content
